MagFlow 120 毫米

了解更多

MagFlow 120 毫米

The Seasonic MagFlow ARGB Fan is a novel cooling product in terms of style and functional modularity. Perfectly positioned, built-in magnetic attachment points connect the fan sides easily, pin-to-pin with a snap. Hassle-free installation saves time and enhances the look of the PC by eliminating the need to run cables in between fans.

The high-quality feel of the MagFlow fan is achieved by using durable materials and fine aesthetic details. The cables on the back are hidden in an X-style support, while the Seasonic logo on the front harmonizes with the blue color strip on the inner side of the frame. The fan blade features an elegant brushed metallic center medallion with the brand logo.

The exact time to market depends on your location. Please contact your local Seasonic Representative to obtain more information. Thank you.

無線併接設計

Magnetic
1入裝

包裝
124.2 mm (L) x 26.6 mm (W) x 120 mm (H)

產品尺寸
三入裝

包裝
3年

產品保固

Magnetic

無線併接設計

包裝

1入裝

產品尺寸

124.2 mm (L) x 26.6 mm (W) x 120 mm (H)

包裝

三入裝

產品保固

3年

無線併接設計

透過磁吸設計，風扇之間可直接串接，不需使用線材，簡化繁瑣的安裝過程。

Fluid Dynamic Bearing Fan

The extremely quiet fluid dynamic bearing with its low vibration further reduces blade deflection and has a long life expectancy.

Efficiency and noise are well-balanced by a special 9-blade fan buried into the FDB bearing to increase blade stability, reduce noise, and maximize airflow. Shock absorbing rubber pads on all corners eliminate vibration between the case and the fans.

線材配置

連接線隨插即用，不管單顆或三顆，透過連接線都可輕鬆安裝，省時又省力。

Easy Installation On Top Of The Radiator

風扇串接後，透過四顆螺絲即可將風扇安裝在冷排上，減少對位和鎖螺絲的時間。

Interface Description

A. Reset/LED Switch: It can be connected to the case Reset or LED Switch, short press the control button to switch the lighting effect, and long press to switch to the motherboard lighting synchronization mode (short press to switch back to the keyed lighting effect mode).

B. LED Control Button: Short press the controller to switch the lighting effect, and long press to switch to the motherboard lighting effect synchronization mode (short press to switch back to the keyed lighting effect mode).

C. ARGB Port: It can be connected to ARGB peripherals, such as fans, light strips and other devices to achieve synchronization of lighting effects.

D. ARGB Signal Header: It can be connected to the ARGB interface of the motherboard to synchronize the lighting effect of the device with the motherboard (you can only control the lighting effect by pressing the button if this cable is not connected).

E. SATA Connector: Connect this cable to a power supply to provide power to the controller.

Installation Instructions

Connect E to the power supply SATA power cable.

Connect the case Reset or LED Switch to the A port.

Make sure that the device that needs ARGB synchronization is connected to the C interface.

If the ARGB device needs to be synchronized with the motherboard, the D cable must be connected to the ARGB interface of the motherboard, and connected to the chassis control button through A, or B is long pressed to switch to the motherboard lighting synchronization mode.

Both A and B can be long long-pressed to switch to the motherboard lighting effect synchronization mode, and short short-pressed to switch to the keyed lighting effect mode.

產品照片

產品規格

型號名稱	MAGFLOW ARGB 120 MM 1-PACK
型號	SF-12025MF-L
產品尺寸	120.4 mm x 124.2 mm x 26.6 mm (Fan including magnet and rubber pads)
標稱輸入電壓	12 VDC
Rated Input Current	0.10 A
Startup Current	0.18 A (max.)
轉速	2000±10% RPM
聲學噪音	30.155 dB (A)
氣流	49.47 CFM
氣壓	2.28 mm-H2O
平均故障間隔時間	十萬小時
軸承類型	流體動力軸承
風扇重量	214 g
產品保固	3年

型號名稱	MAGFLOW ARGB 120 MM 3-PACK
型號	SF-12025MF-L
產品尺寸	120.4 mm x 365.8 mm x 26.6 mm (3 x Daisy-chained fans)
標稱輸入電壓	12 VDC
Rated Input Current	0.10 A
Startup Current	0.18 A (max.)
轉速	2000±10% RPM
聲學噪音	30.155 dB (A)
氣流	49.47 CFM
氣壓	2.28 mm-H2O
平均故障間隔時間	十萬小時
軸承類型	流體動力軸承
風扇重量	214 g
產品保固	3年

資料表
使用者手冊
RoHS 表格