MagFlow ARGB 120 mm

Más información

MagFlow ARGB 120 mm

The Seasonic MagFlow ARGB Fan is a novel cooling product in terms of style and functional modularity. Perfectly positioned, built-in magnetic attachment points connect the fan sides easily, pin-to-pin with a snap. Hassle-free installation saves time and enhances the look of the PC by eliminating the need to run cables in between fans.

The high-quality feel of the MagFlow fan is achieved by using durable materials and fine aesthetic details. The cables on the back are hidden in an X-style support, while the Seasonic logo on the front harmonizes with the blue color strip on the inner side of the frame. The fan blade features an elegant brushed metallic center medallion with the brand logo.

The exact time to market depends on your location. Please contact your local Seasonic Representative to obtain more information. Thank you.

Diseño de cadena de margaritas

Magnético
1 paquete

Embalaje
124.2 mm (L) x 26.6 mm (W) x 120 mm (H)

Dimensiones
Paquete de 3

Embalaje
3 años

Garantía

Magnético

Diseño de cadena de margaritas

Embalaje

1 paquete

Dimensiones

124.2 mm (L) x 26.6 mm (W) x 120 mm (H)

Embalaje

Paquete de 3

Garantía

3 años

Diseño de cadena de margaritas

Los ventiladores individuales se conectan entre sí mediante un mecanismo de enclavamiento con imanes. Este sistema elimina el uso de cables, lo que simplifica y hace más limpia la instalación.

Fluid Dynamic Bearing Fan

The extremely quiet fluid dynamic bearing with its low vibration further reduces blade deflection and has a long life expectancy.

Efficiency and noise are well-balanced by a special 9-blade fan buried into the FDB bearing to increase blade stability, reduce noise, and maximize airflow. Shock absorbing rubber pads on all corners eliminate vibration between the case and the fans.

Modularidad

Independientemente del número de ventiladores que se instalen, la conexión de los cables de alimentación y señal resulta extremadamente fácil y cómoda gracias a los imanes. Los conectores encajan con rapidez y precisión, lo que simplifica enormemente el proceso de montaje.

Fácil instalación sobre el radiador

Una vez conectados los ventiladores, se pueden instalar en la parte superior del radiador de refrigeración por agua con solo cuatro tornillos, lo que reduce el tiempo empleado en la alineación y el bloqueo de tornillos.

Interface Description

A. Reset/LED Switch: It can be connected to the case Reset or LED Switch, short press the control button to switch the lighting effect, and long press to switch to the motherboard lighting synchronization mode (short press to switch back to the keyed lighting effect mode).

B. LED Control Button: Short press the controller to switch the lighting effect, and long press to switch to the motherboard lighting effect synchronization mode (short press to switch back to the keyed lighting effect mode).

C. ARGB Port: It can be connected to ARGB peripherals, such as fans, light strips and other devices to achieve synchronization of lighting effects.

D. ARGB Signal Header: It can be connected to the ARGB interface of the motherboard to synchronize the lighting effect of the device with the motherboard (you can only control the lighting effect by pressing the button if this cable is not connected).

E. SATA Connector: Connect this cable to a power supply to provide power to the controller.

Installation Instructions

Connect E to the power supply SATA power cable.

Connect the case Reset or LED Switch to the A port.

Make sure that the device that needs ARGB synchronization is connected to the C interface.

If the ARGB device needs to be synchronized with the motherboard, the D cable must be connected to the ARGB interface of the motherboard, and connected to the chassis control button through A, or B is long pressed to switch to the motherboard lighting synchronization mode.

Both A and B can be long long-pressed to switch to the motherboard lighting effect synchronization mode, and short short-pressed to switch to the keyed lighting effect mode.

Galería

Presupuesto

Nombre del modelo	MAGFLOW ARGB 120 MM 1-PACK
Número de modelo	SF-12025MF-L
Dimensiones	120,4 mm x 124,2 mm x 26,6 mm (Ventilador con imán y almohadillas de goma)
Voltaje de entrada nominal	12 VDC
Corriente de entrada nominal	0.10 A
Corriente de inicio	0,18 A (máx.)
Velocidad de rotación	2000±10% RPM
Ruido acústico	30.155 dB (A)
Flujo de aire	49.47 CFM
Presión del aire	2.28 mm-H2O
MTBF	100.000 horas
Tipo de rodamiento	Cojinete fluidodinámico
Peso del ventilador	214 g
Garantía	3 años

Nombre del modelo	MAGFLOW ARGB 120 MM 3-PACK
Número de modelo	SF-12025MF-L
Dimensiones	120,4 mm x 365,8 mm x 26,6 mm (3 ventiladores conectados en cadena)
Voltaje de entrada nominal	12 VDC
Corriente de entrada nominal	0.10 A
Corriente de inicio	0,18 A (máx.)
Velocidad de rotación	2000±10% RPM
Ruido acústico	30.155 dB (A)
Flujo de aire	49.47 CFM
Presión del aire	2.28 mm-H2O
MTBF	100.000 horas
Tipo de rodamiento	Cojinete fluidodinámico
Peso del ventilador	214 g
Garantía	3 años

Ficha de datos
Manual de usuario
Formulario RoHS