Seasonic Native 12V-2×6 90° Cable
Native 12V-2x6 90° Cable
Seasonic introduced the native 12V-2×6 90-Degree 600 W graphics card cable to power high-performance GPU / graphic cards. This cable can be used with any of our ATX 3.0 or 3.1 power supplies released on the market. Please see below for important compatibility information.
- The new 90° 12V-2×6 cable (ATX 3.1) is fully backward compatible with the previous 12VHPWR connector (from ATX 3.0). This means you can safely use a 12V-2×6 cable with devices designed for 12VHPWR.
- The exact time to market depends on your location. Please contact support@seasonic.com for more information.
- Remark: Please note that the 90-degree VGA connector variant cable may have directional fit issues with some RTX 40 and RTX 50 VGA cards. We recommend checking the direction of the VGA power connector before use to ensure proper fitting.
A Single Connector To Power Them All
Please see Sea Sonic's compatibility recommendations below:
Compatible with any Seasonic ATX 3.0 or 3.1 power supplies
This means the maximum allowable power pull from the power supply by the VGA can be up to 600 W.
If your VGA is very power usage intensive, then please consider power supplies that are rated at 750 W and higher.
Compatible Series (650 W and higher)
Not compatible series
12V-2x6 (H++) Cables
Recommended Installation Of The Native 90° 12V-2X6 (H++) Cable
- The 12V-2x6 cable is designed to work perfectly when installed correctly. The usage or this cable is exclusively beneficial when both the power supply and the graphics card are equipped with matching 12V-2x6 connectors. To ensure the safe and effective use of the cable, please follow these recommendations:
- Both 12V-2x6 connectors must be plugged at all times.
- Ensure that all connectors are INSERTED, CLICK-LOCKED, and SEATED properly.
- Avoid bending or applying force to the cable too close to the connector.
- Once the cable is plugged into place, DO NOT bend it in any direction.
- Please note that the 90-degree VGA connector variant cable may have directional fit issues with some RTX 40 and RTX 50 VGA cards. We recommend checking the direction of the VGA power connector before use to ensure proper fitting.
| Specifications | |
|---|---|
| Connectors | 1x 12V-2x6 to 1x 12V-2x6 90 Degree - High Current Terminal connectors |
| Gauge | 16 AWG |
| Length | 700 mm |
| Warranty | 2 Years |
| Color | Black |
| Connector(s) per cable | 1 |
| Total Length (mm) | 700 |
| Number(s) of cable(s) included | 1 |
![]() |
|
-
Datasheet
-
User Manual


























